Operation With A Connected Hob; Making The Connection Between Cooker Hood And Hob - Pelgrim ISWA0960MAT Bedienungsanleitung

OPERATION WITH A CONNECTED HOB

Making the connection between cooker hood and hob

The connection to an AutoAir hob is not active by default. First the connection to the hob must
be activated.
At the same time, a setting must also be made on the hob; see the hob manual for this.
Check our website for the full range of hobs that can be connected to your cooker hood.
Making a connection
1. Turn off the hood and the lighting.
2. Press and hold the lighting button on the hood for three seconds, or press and hold the plus
button on the remote control for five seconds.
The indicator lights on the on/off button and speed button 2 of the cooker hood will
▷
flash simultaneously for a maximum of two minutes.
▷ On your hob, activate the pairing mode in the user menu (see the hob manual). The
connection to the hob is established.
3. The connection is successful when the indicator lights on the on/off button and speed
button 2 of the cooker hood are illuminated continuously for two seconds.
If the indicator lights on the on/off button and speed button 2 of the cooker hood are no
longer illuminated within two minutes, the connection was not successful. Repeat the
procedure. If necessary, clear the hood's memory (see "Disconnecting").
Disconnecting
1. Turn off the hood and the lighting.
2. Press and hold the on/off button of the cooker hood for three seconds, or press and hold
the intensive button and lighting button simultaneously on the remote control for five
seconds.
The indicator lights on the on/off button and speed button 2 of the cooker hood will
▷
flash five times simultaneously.
The hob is no longer connected.
▷
EN 12