Switching The Fan On And Off; Switching The Intensive Setting (Boost) On And Off; Switching The Lighting On And Off - Pelgrim ISWA0960MAT Bedienungsanleitung

OPERATION WITH THE REMOTE CONTROL

Switching the fan on and off

1. Shortly press and release the on/off button.
The cooker hood switches on.
▷
The indicator light on the button of the cooker hood shows which setting has been
▷
selected.
2. Select the desired extraction setting by pressing the plus button or minus button.
3. Shortly press and release the on/off button.
The cooker hood switches off.
▷

Switching the intensive setting (Boost) on and off

The cooker hood is switched on.
1. Shortly press and release the intensive button.
The intensive setting is switched on.
▷
▷ The indicator light on the button of the cooker hood is flashing.
▷ The intensive setting switches off automatically after 6 minutes. The previous extraction
setting will be reactivated after this period.
2. Press the on/off button or intensive button to stop the intensive setting at any time.

Switching the lighting on and off

1. Shortly press the lighting button.
The lighting switches on at maximum strength.
▷
2. Touch and hold the lighting button for approximately 3 seconds to dim the lighting strength.
3. To set the lighting back to maximum strength, shortly touch and release the lighting button.
4. To turn off the lighting when the light is dimmed, touch and hold the lighting button for
approximately 3 seconds.
5. To turn off the lighting when the light is at maximum strength, shortly touch and release the
lighting button.
When a connected hob is switched on, the lighting of the cooker hood always switches
on automatically. You can continuously adjust the brightness of the hood via the hob.
When switching off a connected hob, the lighting remains on. Manually switch off the
lighting with the lighting key on your AutoAir hob, with your remote control or via your
hood.
EN 10