External Control; Maintenance; Disposing Of The Product - Espa NOXPLUS Gebrauchsanweisung

The illumination of the LEDs indicates the function
selected at any given moment.

5. EXTERNAL CONTROL

The unit has an "AUX" input for external pump
stop/start control. In stop position, the "FAULT" LED
flashes in "external stop" mode.
See connection diagram on the next page.

6. MAINTENANCE

Under normal conditions these pumps require no
special or planned maintenance.
Clean the pump with a damp cloth without using
harsh products.
If the pump is not to be operated for a long
period it is recommended to remove it from the
installation, drain down and store in a dry, well
ventilated place.
ATTENTION: In the event of faults or damage
occurring to the pump, repairs should only be
carried out by an authorised service agent.
The Official Technical
www.espa.com.

7. DISPOSING OF THE PRODUCT

When the pump is eventually disposed of, please
note that it contains no toxic or polluting material. All
main components are material identified to allow
selective disposal.
This product or parts of it must be disposed of in an
environmentally sound way, use the waste collection
service. If this is not possible, contact the nearest
ESPA service workshop.
Services list is in
8. PLATE SHOWING CHARACTERISTICS
DESCRIPTION
1 Item reference
2 Pump serial no.
3 Flow at max. speed
4 Pressure at max. speed
Rated voltage, no. of phases, AC current symbol
5
and frequency
6 Flow rate at min. speed
7 Pressure at min. speed
Rated voltage, no. of phases, AC symbol and
8
frequency
9 CE marking
10 Maximum pressure at max. speed
11 Maximum current at max. speed
12 QR code with serial number information
13 Max. liquid T
14 Degree of protection against moisture
15 Power consumption of the motor at max. speed
16 Max. pressure at min. speed
17 Motor power consumption at min. speed
18 Motor insulation designation
19 Continuous operation symbol
20 Maximum current at min. speed
Name and address of the seller responsible for
21
the product
14
EN