Start / Stop Cleaning; Select A Cleaning Mode - EUFY RoboVac L35 Hybrid Benutzerhandbuch

English
Schedule Cleaning
With the eufy Clean app, you can schedule RoboVac to start cleaning at a particular time.
• You can set the time and customize the cleaning schedules from Sunday to
Saturday on the eufy Clean app. This function is only available on the app.

Start / Stop Cleaning

• You can also start or stop cleaning via the eufy Clean app.
1
Press and hold for 3 seconds to turn on.
3 sec
2
Press to start cleaning in Auto Cleaning mode.
• To pause cleaning, press again.
• To turn off, press and hold for 3 seconds.
*If RoboVac is not responding when you press a button, press the Force Shutdown
button (located inside the main unit) to forcibly power off the device. Then press and
hold for 3 seconds to restart the device.
22 EN

Select a Cleaning Mode

Auto Cleaning Mode
Press to start cleaning in Auto Cleaning mode. You can also select this mode in the
eufy Clean app.
• During cleaning, RoboVac will return to the auto empty station automatically
if the battery level becomes low. To resume cleaning from where it left off,
enable this feature in the eufy Clean app.
• By default, RoboVac starts in Auto Cleaning mode when it is turned on.
Spot Cleaning Mode (Only Available via the eufy Clean App)
In this mode, RoboVac intensively cleans a specific area with a size of 4.9 ft x 4.9 ft /
1.5 m x 1.5 m — great for concentrated areas of dust or debris. When the cleaning of a
certain zone is finished, RoboVac will automatically return to the auto empty station.
4.9 ft / 1.5 m
English
EN 23