ELNA eXcellence 720 Gebrauchsanleitung Seite 40

z
q
x
w
z
q
x
r
t
c
y
To disengage the Dual Feed Device
z
Raise the needle and the presser foot lifter q
to its extra lift position.
x Pull down the Dual feed device w and swing it to
the rear to disengage. Push up the Dual feed
device until the notch of the Dual feed device
catches the pin e.
e
Detaching the Dual Feed Foot
z
Set the presser foot lifter to normal position.
x
Loosen the thumb screw r and remove the Dual feed
foot t.
Attach the presser foot holder y to the presser
c
bar u.
Tighten the thumbscrew by turning it clockwise
lightly.
Lower the presser bar.
u
Depress the foot against the needle plate, and
loosen the thumbscrew slightly.
Tighten the thumbscrew firmly.
r
34