Operating - Medisana NM A90 Gebrauchsanweisung

3.1
1. Insert the power supply unit plug into the connection
Using with
unit.
the power
2. Plug in the power supply unit.
supply unit
3. Place the massager around the neck so that it has sufficient hold on the
shoulders.
4. Press the MASSAGE button
appliance starts working straight away at low intensity. Press the MAS-
SAGE button
Press the MASSAGE button
5. Press the HEAT
cator lights up. To switch the heat function off, press the HEAT
again.
6. Guide your hands through the hand straps
pulling on the straps you may stabilize the device in its position and
adjust the massage intensity (pulling more stronger increases the mas-
sage intensity)
7. After 15 minutes of constant use the device will switch off automatically.
3.2
Press ON/OFF button
Audio
Pressing the FORWARD button
function
Select the volume by rotating the volume control
Plug the audio cable into the AUX plug
MP3 players e.g.). Plug/unplug the audio cable will toggle the audio mode.
NOTE
Please select a pleasent, not too loud volume. After 30 minutes of
constant use the audio function will switch off automatically.
, to switch on the massage function. The
8
twice to change to massage intensity to a higher level.
8
8
button to switch on the heat function. The LED indi-
7
to activate/deactivate audio function.
3
2

3 Operating

once again to switch the appliance off.
on right and left side. By
5
will toggle 8 different nature sounds.
.
1
to use external audio sources (like
4
GB
on the control
6
button
7
37