Operation, Water Care And Accessories - Swim & Fun Santorini XL Pool Bedienungsanleitung

TIP!
Priming: Attach a hose to the base of the skimmer and switch on the water. Now the
water runs to the pump and completely fills the pump with water. Now start the pump
and as soon as the pump starts to pull water through the system, a negative pressure
will be formed in the hoses.
If there is air in the system you can remove it by slightly opening the ventilation valve
on the lid.
There is no need to re-prime unless for some reason the hoses have been disconnected.
7.

Operation, water care and accessories

2 x 5 hour filter cycles per day, and cleaning the pool bottom and water line, are all necessary
measures for maintaining clean pool water.
What the filter system does not eliminate is algae, bacteria and other microorganisms that cloud
and colour the water and affect the water purity and hygiene.
Specific products exist to prevent their appearance and eliminate them. With a correct dose, these
products do not cause harm or any problems to the filter system, pool or bathers, but they guaran-
tee that the pool water is perfectly disinfected.
Water care products
For specific water care products see page 2 and visit swim-fun.com for product spec-
ifications, guides, tips and useful information on how you maintain crystal clear pool
water.
NOTE!
Filterballs needs to be replaced once a year. Alternatively, you can wash them,
for example in a washing machine without the use of soap at a max temperature
of 30°.
Beware! Cleaning the bottom of the pool
This filter system cannot be used for the vacuuming of the pool floor. For this you will
need a pump with a motor power of at least 250W.
W can instead recommend the CleanRunner pool robot (art. 1046)
58
MV-1087-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK