Ec Declaration Of Conformity - Makita BHR202 Bedienungsanleitung

ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Reversing switch lever
5-1. Rotation with hammering
5-2. Lock button
5-3. Action mode changing knob
6-1. Rotation only
7-1. Hammering only
8-1. Grip base
8-2. Teeth
SPECIFICATIONS
Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-6:
Work mode : chiseling function
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete, 10 mm
diameter and 100 mm depth
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
8-3. Side grip
8-4. Protrusion
8-5. Loosen
8-6. Tighten
9-1. Bit shank
9-2. Bit grease
10-1. Bit
10-2. Chuck cover
11-1. Bit
11-2. Chuck cover
12-1. Action mode changing knob
12-2. O symbol
14-1. Depth gauge
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
) : 87 dB(A)
pA
) : 98 dB(A)
WA
value (tri-axial vector
2
) : 11 m/s
h,CHeq
2
2
) : 14.5 m/s
h,HD
2
ENE043-1
Work mode : drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
EC-DECLARATION OF CONFORMITY
ENG102-1
Model; BHR202
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 2004/108/EC, 98/37/EC.
ENG215-1
000230
sum)
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
ENG303-1
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
4
15-1. Dust cup
17-1. Blow-out bulb
19-1. Chuck adapter
19-2. Keyless drill chuck
20-1. Sleeve
20-2. Ring
21-1. Limit mark
22-1. Recesed part
22-2. Holder cap cover
23-1. Brush holder cap
23-2. Screwdriver
BHR202
20 mm
13 mm
26 mm
0 - 1,100
0 - 4,000
358 mm
3.2 kg
D.C. 18 V
) : 3 m/s
h,D
2
EN55014 in accordance
CE2007
Tomoyasu Kato
Director
ENG301-1
2
ENH102-7
with Council