Interface Description; Fieldbus Interface Capabilities - SICK DL100 Pro Betriebsanleitung

1.

Interface Description

1.1. Fieldbus Interface Capabilities

•
IO Connection 1 exclusive owner, up to 2 listen only
•
IO Connection type Cyclic, minimum 2 ms
•
Explicit Messages
o Get_Attribute,
o Set_Attribute
•
UCMM supported
•
Predefined standard objects
o Identity Object
o Message Route Object
o Assembly Object
o Connection Manager
o Ethernet Link Object
o TCP/IP Object
o DLR Object
o QoS Object
•
Additional objects
o Position Sensor Object (0x23)
•
DHCP and BOOTP supported
•
Baud rates 10 and 100 MBit/s
•
Data transport layer Ethernet II, IEEE 802.3
•
ACD supported
•
DLR (ring topology) supported
•
Integrated switch supported
•
Reset services supported
© SICK AG • Subject to change without notice • 8016993/ZVZ7/2018-03-22
Betriebsanleitung Entfernungs-Messgerät DL100 Pro – EtherNet/IP
67