Tone Or Pulse Dialling Mode; Fitting The Belt Clip - AUDIOLINE 5400TECH Quintett Bedienungsanleitung

4.7

Tone or Pulse dialling mode

This feature enables the telephone to be connected and used on both
analogue (pulse dialling) and digital (tone dialling) connections. The
equipment is set to TONE dialling (DTMF) at the factory. If the telephone
does not work on your telephone connection, refer to Chapter 9.4 to learn
how to switch the telephone to pulse dialling.
4.8

Fitting the belt clip

Slide the belt clip into the guide until it audibly engages at the sides.
54
− Starting Up −