Cleaning
Replacing the
dust bag
F
2
G
1
Cleaning and Maintenance
Warning!
Turn off the vacuum cleaner and unplug it before
cleaning and maintenance. Thus, you may prevent
unintentional operation of the appliance.
Attention!
Do not use any cleaning agents, abrasives or alcohol.
These may damage the external housing.
Clean the device only with a dry or damp piece of
cloth.
You may clean the filter compartment with damp piece
of cloth, too, when required.
Note!
If the dust bag is not in place or not in the correct posi-
tion, the lid lock shall prevent the dust compartment lid
from closing correctly. Always ensure that all the filters
are inserted before you use the vacuum cleaner.
1. Open the dust compartment lid by pulling the
unlocking button (F).
2. Tilt the lid of the appliance back completely.
3. Press the lid lock [G] to hold it, you may remove
the dust bag now.
4. Insert a new dust bag to the housing. To do so,
place the dust filter bag support plate in the holder
on the bottom [1], and then press the retaining
plate into the top latch [2].
5. Press the dust compartment lid until a click is
heard.
41