Disassembly And Disposal; Safety Information For Disassembly And Disposal; Disassembly; Disposal - RK Rose+Krieger MonoLine MT Safelock Montageanleitung

Disassembly and disposal

Disposal

9

Disassembly and disposal

9.1 Safety information for disassembly and disposal

Improper disassembly

9.2 Disassembly

9.3 Disposal
140
WARNING!
Risk of injury in the event of improper disas-
sembly!
Sharp-edged components, tips and corners on the
linear unit or the required tools can cause injury.
– Ensure that there is sufficient space before
starting work.
– Handle exposed components with sharp edges
carefully.
– Ensure that the work area is clean and tidy at all
times! Components and tools lying around or on
top of one another are sources of accidents.
– Disassemble components properly. Observe the
components' sometimes high net weight. If
necessary, use lifting gear.
– Secure components so that they do not fall
down or topple over.
– Consult with the manufacturer in the event of
uncertainties.
Before starting disassembly:
n Physically disconnect the linear unit from the electrical power
supply (if available).
n Dispose of operating materials in an environmentally friendly
manner.
Then clean the modules and components properly and disas-
semble them, adhering to the applicable local occupational health
and safety and environmental protection regulations.
If no return or disposal agreement was concluded, have disas-
sembled components recycled:
Scrap metals.
n
n Have plastic components recycled.
n Dispose of other components sorted by their material composi-
tion.
Linear unit RK MonoLine MT Safelock 08.04.2021