Inhaltsverzeichnis
Werbung
Plasma cutting
Suitable for welding with an increased
electric risk.
Single-phase alternating current with
rated frequency of 50-60 Hz
Direct Current
Fan
Maintenance
Unplug the machine before any work on it.
WARNING In order to ensure the safety of the device,
only genuine spare parts from the manufacturer or
spare parts that have been approved by the manufac-
turer should be used.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer
or its customer service or a similarly qualified person
to avoid danger.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Let us refer to the fact we do not assume any respon-
sibility – according to standards in force – for damage
eventually caused by our appliances in the below-
mentioned cases:
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.
Service
Do you have any technical questions? Do you have a
complaint? Do you require spare parts or an opera-
ting manual? You can get quick and unbureaucratic
assistance in the Service section on the homepage
of our service partner Güde GmbH & Co. KG (www.
guede.com). Please help us to help you. In order to be
able to identify your device in the case of a complaint,
our service partner will require its serial number,
article number, and year of manufacture. All this
information can be found on the nameplate.
Tel.:
+49 (0) 79 04 / 700-360
Fax:
+49 (0) 79 04 / 700-51999
E-Mail:
support@ts.guede.com
Failure removal
Failures
Causes
Electric arc
Poor contact
turned off
between earth
pliers and the
respective part
Short circuit
between current
nozzle and gas
supply pipe
Too loose cur-
rent nozzle
Welder suddenly
Welder has
stops working
overheated due
after longer
to too long use
operation
and the thermal
protection has
activated
ENGLISH
17
Removal
Tighten the
pliers and check
them
Remove paint
and rust
Clean or replace
the current and
gas nozzle
Current nozzle
without dirt,
paint and rust
remains
Tighten the
current nozzle
firmly
Let the welder
cool down
Werbung
Inhaltsverzeichnis
