The fan continues to operate after the hob has switched
off:
– this is not a defect, the fan is protecting the electronic
equipment
– the fan will stop automatically.
The automatic cooking controller does not seem to be
working:
– the cooking zone is still warm [
– the maximum cooking level has been selected [
– the cooking level was selected using the control key [
10.2 Messages at the extraction
Code
1st LED
– Run-out function activated
flashes
– The tower was not detected at the requested
position.
– Check nothing can prevent the movement of
2 LEDs
the extraction tower
flash
– Press the button
– Contact Novy
– The extraction tower is removed or not places
correctly onto the extraction opening.
4 LEDs
– Realign the extraction tower.
flash
– Press the button
– Contact Novy
The cooker hood does not extract well. What can be the
cause of this problem?
– Check the grease filter. Follow the cleaning indication. On
average, the filter must be cleaned every two weeks to
ensure the extraction works correctly.
– Check the air supply in the house. As soon as the cooker
hood is switched on, make sure that air is supplied by
opening the grates in the windows or by opening a window.
– Check the duct for blockages or constrictions which prevent
proper extraction of the air.
]
H
]
9
‐
].
and hold for 2 seconds.
and hold for 2 seconds.
10.3 Miscellaneous
Fault: In the event of a fault, please do not hesitate to contact
our Repair Service:
Belgium:
France:
Germany:
The Netherlands:
Spain:
Italy:
For all other countries, contact your local Novy installation
engineer in Belgium:
For a proper and prompt handling the Repair Service needs to
know the type of your device. This information can be found on
the type plate on the inner frame of the extraction unit.
Stick the provided sticker with the type plate and serial number
here.
– 71 –
Tel.: +32 (0)56 36 51 02
Tel.: +33 (0)3 20 94 06 62
Tel.: +49 (0)511.54.20.771
Tel.: +31088-0119110
Tel.: +34 938 700 895
Tel.: +39 039.20.57.501
Tel.: +32 (0)56/36.51.02