Rollei Studio 300 Anleitung Seite 29

Operation
Radio mode
Press the radio mode button [17] to switch the flash to radio mode . The symbol [20]
on the display starts flashing .
– Press the "minus" or "plus" button [9/16] until the display shows "7" . Then the
flash is set for use with the Rollei Professional Radio Transmitter Mark II or the
Jinbei TR-Q7 .
– Press the "minus" or "plus" button [9/16] until the display shows "C", "N", "S"
or "F" for using the radio remote controls .
Wireless Remote Control
TTL-C (Canon remote control)
TTL-N (Nikon remote control)
TTL-S (Sony remote control)
TTL-F (Fujifilm remote control)
CH/GR (CH & GR remote control)
Canon RT radio „ID" numbers can be set between 00 – 99 / AU .
Flash and Canon speedlites can be synchronized when CH & ID numbers keep the
same .
Press the "minus" or "plus" button [9/16] until the display shows "Radio
6" . The flash is then set for use with the Jinbei radio remote control
TR-V6 .
Press the "minus" or "plus" button [9/16] until the display shows "Radio
0" . Then the flash is set for for use with the Jinbei TRS-V radio remote
control .
A long press on the radio mode button switches the radio mode off .
29