Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex XFE 15 125 18.0-EC Originalbetriebsanleitung

XFE 15 125 18.0-EC / XFE 15 150 18.0-EC / XCE 8 125 18.0-EC
Contents
Symbols used in this manual . . . . . . . . 15
Symbols on the power tool . . . . . . . . . . 15
For your safety . . . . . . . . . . . . . . . . . . . 15
Noise and vibration . . . . . . . . . . . . . . . . 17
Technical specifications . . . . . . . . . . . . 18
Overview . . . . . . . . . . . . . . . . . . . . . . . . 19
Instructions for use . . . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 23
Disposal information . . . . . . . . . . . . . . . 25
Declaration of Conformity . . . . . . . . 25
Declaration of Conformity . . . . . . . . 25
Exemption from liability . . . . . . . . . . . . . 26

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power tool,
read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 25)!

For your safety

WARNING!
Before using the polisher, please read and
follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This polisher is state-of-the-art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The polisher
may be used only
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

This hand-operated orbital polisher is
designed
- is designed for industrial applications,
- for all types of polishing work, e.g. paint-
work on vehicles, furniture and metal
surfaces, etc. with polishing sponge,
- for use with polishing tools which are
permitted to run at a speed of at least
500 r.p.m..
Safety instructions for polishing
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
15