Waeco MagicWatch MW650 Montage- Und Bedienungsanleitung Seite 39

MW-650-4DSM.book Seite 39 Dienstag, 16. Mai 2006 4:28 16
All manuals and user guides at all-guides.com
MagicWatch MW650
6.5 Fastening the display
Note the following information when selecting a place to fit the display:
The display must be easily visible when you are reversing.
Fit the display so that there is no danger of injury, for example when
sharply braking.
Do not fit the display where an airbag may open. This could cause injury
if the airbag opens.
Its compact design means it can be fitted in many places in the vehicle.
Good positions are (see fig. 14, page 7):
– Above the rear view mirror
– On the dashboard
– On the ceiling
– On the window beside the wing mirror
➤ Pull off the protective foil and stick the display in a suitable position.
The plug's polarity cannot be reversed: It can be only be plugged
into the connection in one way..
➤ Insert the display plug into the socket of the corresponding extension
cable (see fig. 16 A, page 7).
➤ Lay the extension cable to the control electronics and insert the plug of
the extension cable into the socket on the control electronics (see
fig. 16 B, page 7).
Installing MagicWatch
39