Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
plant protection liquids.
Devices may not be used for spraying
Only trained, healthy and rested people may work with the device. You
plant protection liquids.
should not be under the influence of alcohol, drugs or medication.
Children and adolescents must not use the device
Only trained, healthy and rested people may work with the device. You
EN
EN
Keep the spraying devices safe from access to children.
should not be under the influence of alcohol, drugs or medication.
Take precautions to prevent hazardous substances from being misused.
Safety
Devices may not be used for spraying
Children and adolescents must not use the device
→ Accident risk!
plant protection liquids.
Keep the spraying devices safe from access to children.
Take precautions to prevent hazardous substances from being misused.
Keep bystanders away during spraying.
Only trained, healthy and rested people may work with the device. You
→ Accident risk!
Never spray on people, animals, electrical devices and lines, into the wind,
should not be under the influence of alcohol, drugs or medication.
or into bodies of water.
Children and adolescents must not use the device
Keep bystanders away during spraying.
→ Risk of injury!
Keep the spraying devices safe from access to children.
Never spray on people, animals, electrical devices and lines, into the wind,
Take precautions to prevent hazardous substances from being misused.
or into bodies of water.
Wear appropriate protective clothing, goggles and respiratory protection in line
→ Accident risk!
→ Risk of injury!
with the applicable national regulations when working with hazardous substances.
Keep bystanders away during spraying.
Wear appropriate protective clothing, goggles and respiratory protection in line
Avoid ignition sources in the environment.
Never spray on people, animals, electrical devices and lines, into the wind,
with the applicable national regulations when working with hazardous substances.
Do not allow the device to remain under pressure and/or exposed directly to
or into bodies of water.
Avoid ignition sources in the environment.
sunlight. Make certain the device is not heated beyond the maximum
→ Risk of injury!
operating temperature. (→Table 1).
Do not allow the device to remain under pressure and/or exposed directly to
Wear appropriate protective clothing, goggles and respiratory protection in line
Protect the device from frost and ammonia.
sunlight. Make certain the device is not heated beyond the maximum
with the applicable national regulations when working with hazardous substances.
Never blow through the nozzles or valves with your mouth.
operating temperature. (→Table 1).
Avoid ignition sources in the environment.
Protect the device from frost and ammonia.
→ Risk of poisoning!
Do not allow the device to remain under pressure and/or exposed directly to
Never blow through the nozzles or valves with your mouth.
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice,
sunlight. Make certain the device is not heated beyond the maximum
on slopes and on uneven terrain.
→ Risk of poisoning!
operating temperature. (→Table 1).
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice,
Repairs and modifications to the device are not permitted.
Protect the device from frost and ammonia.
on slopes and on uneven terrain.
Have damaged parts or parts that do not work properly repaired immediately
Never blow through the nozzles or valves with your mouth.
by our customer service department or by service partners authorized by us.
Repairs and modifications to the device are not permitted.
→ Risk of poisoning!
The effect of the safety valve must not be bypassed or made inoperative.
Have damaged parts or parts that do not work properly repaired immediately
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice,
→ Explosion hazard!
by our customer service department or by service partners authorized by us.
on slopes and on uneven terrain.
The effect of the safety valve must not be bypassed or made inoperative.
Use only original spare and accessory parts.
Repairs and modifications to the device are not permitted.
→ Explosion hazard!
We cannot assume any liability resulting from the use of third-party parts.
Have damaged parts or parts that do not work properly repaired immediately
Use only original spare and accessory parts.
When pumping, always observe the pressure gauge to ensure the maximum
by our customer service department or by service partners authorized by us.
We cannot assume any liability resulting from the use of third-party parts.
spraying pressure is not exceeded (→ Table 1).
The effect of the safety valve must not be bypassed or made inoperative.
All excess pressure must be released from the device before filling, after
When pumping, always observe the pressure gauge to ensure the maximum
→ Explosion hazard!
use, before carrying out maintenance work, on work breaks, and before
spraying pressure is not exceeded (→ Table 1).
placing it in storage.
Use only original spare and accessory parts.
All excess pressure must be released from the device before filling, after
We cannot assume any liability resulting from the use of third-party parts.
use, before carrying out maintenance work, on work breaks, and before
Points to note when transporting the device: Transport the device in such
placing it in storage.
a way that it is protected against damage and tipping. All excess pressure
When pumping, always observe the pressure gauge to ensure the maximum
must be released from the device.
spraying pressure is not exceeded (→ Table 1).
Points to note when transporting the device: Transport the device in such
→ Explosion hazard!
All excess pressure must be released from the device before filling, after
a way that it is protected against damage and tipping. All excess pressure
use, before carrying out maintenance work, on work breaks, and before
must be released from the device.
If the device leaks at the container, immediately depressurise the device
placing it in storage.
→ Explosion hazard!
and put it out of operation!
→ Risk of explosion!
Points to note when transporting the device: Transport the device in such
If the device leaks at the container, immediately depressurise the device
a way that it is protected against damage and tipping. All excess pressure
and put it out of operation!
must be released from the device.
→ Risk of explosion!
→ Explosion hazard!
If the device leaks at the container, immediately depressurise the device
and put it out of operation!
→ Risk of explosion!
6993240_0223_3270W-15Spr-neutr.indd 13
6993240_0223_3270W-15Spr-neutr.indd 13
13
ENGLISH
ENGLISH
ENGLISH
05.04.2023 13:52:57
05.04.2023 13:52:57
Werbung
Inhaltsverzeichnis
