Scope Of Delivery; Technical Data - Mesto 3232F Serie Gebrauchsanleitung

EN
+
You will find the illustrations referred to above in the pages 3 – 5 of these
instructions for use.

Scope of delivery

Tank [1], pump [2], hose line [4], shut-off valve [9], instructions for use [5], carrying strap
[6], spray wand [7]. (Fig. 1)

Technical data

Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Max. volume flow
Recoil force
Table 1
Assembly
1. Attach the carrying strap [6] to the tank. (Fig. 2)
2. Insert the riser pipe [4a] of the hose line [4] into the tank opening and secure the hose
line [4] with the cap nut. (Fig. 3)
+
Make sure that the riser pipe [4a] in the tank points upwards in the direction of the
pump opening.
3. Push the hose [4] onto the shut-off valve [9] and secure it with the cap nut [37]. (Fig. 3)
4. Screw the spray wand [7] onto the shut-off valve [9] (Fig. 3)
Checks
Visual inspection: Are tank [1], pump [2], hose [4], shut-off valve [9] and spray wand [7]
with nozzle undamaged? (Fig. 1)
+
Pay special attention to the connections between the tank – hose and the hose –
shut-off valve and to the condition of the pump threading and spray wand.
No leaks: Pump up the empty device to 2 bar (29 psi). (Fig. 11).
► The pressure must not decrease more than 0.5 bar (7,35 psi) within 30 minutes.
Function: Pull up the piston pressure gauge [16] (Fig. 5)
► The pressure must dissipate.
+
Using the lock [40] the lever on the shut-off valve [9] can be locked and unlocked.
Unintentional spraying is prevented after locking. (Fig. 14)
► If required, reset the lock [40] and activate the shut-off valve [9]. (Fig. 14)
► The shut-off valve must open and close.
Check the device regularly and after a longer period of non-use, e.g. a winter break.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
3232F..
4 l (0.88 gal)
6.5 l (1.42 gal)
3 bar (43 psi)
30 °C (78 °F)
1.7 kg
Polyethylene
3.16 l/min (0.69 gal/min)
< 5 N
15
ENGLISH