Winding Up The Spare Thread; Storage; Disposal And Protection Of The Environment - Parkside PRTA 20-Li C3 Originalbetriebsanleitung

8. Pull on the line ends and press the lock-
ing button (23) repeatedly until the line
ends protrude approx. 1 cm beyond
the line cutter (24).
Check the line cutter (24). Never
use the device without a line cutter
or with a defective line cutter. If the
line cutter is damaged, be sure to
contact one of our customer service
centres.
Winding up the spare
thread
1. Thread an end of the spare thread
through the opening of the spool (25).
2. Wind the thread in the threading direc-
tion of the spool (14). Follow the ar-
rows on the top of the spool (14).

Storage

• Store the trimmer in a dry place well
out of reach of children.
• Do not stand the trimmer on its protec-
tive cover. Suspend it by its upper han-
dle in such a manner that the protective
cover does not come into contact with
other objects. This is because the pro-
tective cover could become deformed,
thereby changing its dimensions and its
safety properties.
• The storage temperature for the re-
chargeable battery and the device is
between 0 °C and 45 °C. Avoid ex-
treme cold or heat during storage to en-
sure the battery output is not adversely
affected.
Disposal and protection
of the environment
Remove the rechargeable battery before
disposing of the device.
The device, accessories and packaging
should be properly recycled.
Instruction on how to dispose of the re-
chargeable battery can be found in the
instruction manual for your battery and
charger.
Machines do not belong with do-
mestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmen-
tally sound manner at the end of its life.
In this way, environmentally friendly and
resource-saving recycling is ensured.
Depending on implementation in national
law, you may have the following options:
• Return to a shop,
• Hand over to an offi cial collection
point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.
Feed clippings to composting and do not
throw them into the refuse bin.
GB
31