Hedge Trimmer Safety Warnings; Additional Safety Instructions - Parkside PHS 650 A1 Originalbetriebsanleitung

g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip
surfaces do not permit safe operation
and control over the power tool in un-
expected situations.
5) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Hedge trimmer safety
warnings
a) Keep all body parts away from
the blade. Do not attempt to re-
move clippings or to hold onto
material to be cut when the
blades are running. The blades
continue to move after turning off the
switch. A moment of inattention when
using the trimmer can result in serious
injuries.
b) Hold the hedge trimmer by the
handle when the blade is at a
standstill and make sure you do
not press the switch. Carrying the
hedge trimmer correctly reduces the
risk of inadvertent operation and being
injured by the blade as a result.
c) Always place the protective cov-
er onto the blades while trans-
porting or storing the hedge
trimmer. Careful handling of the
hedge trimmer reduces the risk of injury
from the blade.
d) Ensure that all switches are
turned off and the mains plug
is unplugged/the battery is re-
moved or switched off before
removing jammed clippings or
maintaining the machine. Unex-
pected operation of the hedge trimmer
when removing jammed material can
lead to serious injuries.
e) Hold the hedge trimmer only by
the insulated gripping surfaces
as the cutting blades may come
into contact with hidden wiring
or its own mains cable. The blades
coming into contact with a live wire can
also cause a charge in metal parts of the
appliance and result in an electric shock.
f) Keep all mains cables and lines
away from the cutting range.
Cables and lines may be concealed in
hedges and bushes and be inadvert-
ently cut by the blade.
g) Do not use the hedge trimmer in
bad weather, especially if there
is a danger of a storm. This reduc-
es the risk of being struck by lightning.
Additional safety
instructions
• Connect the appliance to a power socket
with a residual current circuit breaker of rat-
ed residual current no more than 30 mA.
• If the replacement of the supply
cord is necessary, this has to be
done by the manufacturer or his
agent in order to avoid a safety
hazard.
• The hedge trimmer is intended for work
during which the operator stands on the
GB
23