Operation; Removing/Inserting The Battery; Checking The Charge Status Of The Rechargeable Battery - Parkside PAP 20 B1 Originalbetriebsanleitung

Operation

Removing/
inserting the
Battery
Only insert
the re-
chargeable bat-
tery once the bat-
tery-operated tool
is ready for use.
Risk of injury!
1. To remove the
battery (4) from the
appliance, press the
release button (1)
on the battery and
pull out the battery.
2. To insert the battery
(4), place it on the
guide track and
push it into the
appliance. It will
audibly snap in.
Checking the
charge status of the
rechargeable battery
The battery charge sta-
tus indicator (3) signal-
ises the state of charge
of the battery (4).
Press the button (2) on
the battery. The state
of charge of the bat-
tery is displayed by il-
luminating the 3-colour
LED lights of the state
of charge display.
3 LEDs light up (red,
orange and green): Bat-
tery is fully charged.
2 LEDs light up (red
and orange): Battery
has a residual charge.
1 LED lights up (red):
Battery has to be
charged
GB CY
13