Technical Data; Noise/Vibration Information - Bosch PFS 5000 E Originalbetriebsanleitung

22 | English
a)
(14) Transfer bucket
(15) Nozzle needle
(16) Container seal
(17) Suction tube
(18) Ventilation hole
(19) Paint channel
(20) Air hose
(21) Bayonet lock
(22) Base unit
(23) Carrying handle
(24) Holding clamp
(25) On/off button with air flow control
(26) Hose port (base unit)
(27) Accessory compartment
(28) Cleaning brush
(29) Air filter cover
(30) Air filter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Fine-spray system
Article number
Rated power input
Spraying capacity
Required time for application
2
of paint on 3 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-1.
Typically the A-weighted noise level of the power tool are: 84
dB(A); sound power level 95 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-1:
2 2
a < 2.5 m/s , K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
1 609 92A 7VA | (30.05.2022)
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
u
PFS 5000 E
Connecting the air hose (see figures A1–A3)
3 603 B07 2..
– Open the holding clamp (24) and unwind the air
W 1200
ml/min 500
Connecting the base unit:
min 1
– Insert a bayonet lock (21) of the air hose securely into the
ml 1000
– Turn the bayonet lock a quarter turn clockwise.
m 4
Connecting to the spray gun:
– Insert the second bayonet lock (21) of the air hose se-
kg 4,9
/ II
– Turn the bayonet lock a quarter turn clockwise.
Note: Remove the air hose (20) before pouring in spray ma-
terial (quarter turn of the bayonet lock (21) anticlockwise;
pull the bayonet lock (21) out of the port (9)).
Changing the nozzle cap (see figures B1–B2)
The fine-spray system is supplied with three nozzle caps:
Paint
Delivery con-
dition
Application
Pull the plug out of the socket before carrying out any
work on the power tool.
Ensure that the spray gun and base unit are as-
sembled completely and with all seals. Only this will en-
sure the function and safety of the fine-spray system.
hose (20) completely from the base unit (22).
holes in the base unit port (26) according to the arrow
marks.
curely into the holes in the spray gun port (9) according
to the arrow marks.
Nozzle cap
(10)
White
Mounted
compartment (27) under the
"Wall" "Wood/var-
(11) (12)
Grey Black
In the accessory
holding clamp (24)
"Wood/lac-
nish" quer"
Bosch Power Tools