Operating; Before First Use; Hints; Assembly - Westfalia 80 01 15 Bedienungsanleitung

All manuals and user guides at all-guides.com

Operating

Before first Use

Remove all packaging from the steam mop. Keep packaging out of reach of small
children. There is risk of suffocation!
Clean all parts of the appliance before using the first time as described below
under "Cleaning".
According to functional tests, residual humidity can remain in the water tank.
Residual humidity in a factory-new article is not a fault.

Hints

As the steam mop only uses active power of steam, it is environment-friendly.
You do not need any detergent or aggressive chemicals. The steam mop is
designed for cleaning normally dirt hard floors such as marble, granite, ceramic,
stone, linoleum, sealed hard wood floors and parquet.
With the 360° rotatable steam foot the steam mop is perfect for cleaning corners.
The water is heated up within 30 seconds and the appliance is ready for use.
The water level can be checked any time with the transparent water tank. The
water tank is detachable and can easily be filled. With one tankful the steam mop
can be used for approx. 30 minutes.
When positioning the steam mop upright, the steam will automatically be switched
off.
With the steam control the amount of stem is infinitely adjustable.
Do not clean sensitive surfaces such as unsealed wood floors or laminate with
this steam mop. Avoid cleaning oiled or on wax treated surfaces. The wax may be
damaged or removed by the hot steam. Check with your floor manufacturer to
ensure suitability to steam cleaning.
Do not use the steam mop for cleaning furniture made from leather, synthetic
fabric, velvet etc. Do not use the steam mop on glossy surfaces. The surface
might become matt.

Assembly

For transport protection the steam mop is supplied partly assembled. Please
assemble the appliance as follows:
1. Connect the steam mop and the steam foot (10) together. Make sure the
parts fit into each other.
11