Mounting The Automatic Transfer Switch; Requirements For The Installation Site; Minimum Distances - Viessmann Vitocharge VX3 Backup-Box 3PH A Installationsanleitung

5.

MOUNTING THE AUTOMATIC TRANSFER SWITCH

5.1

Requirements for the installation site

DANGER
 The supporting surface is made up of solid material
 The supporting surface is appropriate for weight and dimensions
 The installation site is accessible at all times
 Climatic conditions are complied with (see technical data)
 The installation site is not subjected to direct sunlight or direct weathering
 The installation site is protected from splashing water
 Technical connection conditions of the grid operator are complied with
Mounting position
5.2

Minimum distances

Installationsanleitung_10016712_Viessmann_Vitocharge VX3_3PH_V1.0
Danger to life due to fi re and explosion

Do not mount the Automatic Transfer Switch on a fl ammable surface!

Do not install the Automatic Transfer Switch in areas containing highly fl ammable substances!

Do not install the Automatic Transfer Switch in potentially explosive areas!
200 mm 200 mm 1.200 mm
Page 39 of 52