Westfalia T82004 Bedienungsanleitung Seite 24

Fault Cause
Lifting arm Oil level is too low
cannot be
lowered
completely
Spring is unhook or
worn
Jack does not Air in the hydraulic
lift up system
smoothly
All manuals and user guides at all-guides.com
Troubleshooting
Solution
Lower lifting arm, fill in hydraulic oil up
to approx. 6.4 mm under the seam of
the filling plug.
Clean spring, lubricate all moving
parts. Have defective parts replaced.
Close the release valve. Step with one
foot on the front wheel and completely
lift up the lifting arm with your hand.
Open the release valve and lower the
lifting arm slowly.
19