6.5.2 Quality Control (QC) settings
Quality Control (QC)
Language
Configure Quality Control
Show QC Configuration
QC Configuration
Select Status
Quality Control
QC Configuration
Select Inter val
Daily
Weekly
Bi-Weekly
After x measurements
1. On the Administration screen, select Quality Control (QC) Settings.
You can select:
•
Configure Quality Control to change the settings.
Show QC Configuration to display the current settings.
•
2. Select Configure Quality Control.
3. Select ON/OFF to activate or deactivate the QC mode.
For further information see "6.3 Quality control (QC)".
off
4. Select the Arrow Right button to move to the next screen.
5. Select the interval to perform the quality control
•
by time: select daily, weekly, bi-weekly or
by number of performed measurements: select After x measurements.
•
Select the Arrow Right button.
Instructions for use
© Bosch Healthcare Solutions GmbH
Settings
49