Parkside PPL 10 A1 Bedienungsanleitung Und Sicherheitshiweise Seite 26

Parkside PPL 10 A1
• Make sure that no fire hazards (e.g. burning candles) are
placed on or near the plant light. Fire hazard!
DANGER: Risk of electric shock!
• The housing of the plant light must not be damaged. If the
housing is damaged, there is a risk of electric shock.
• Always plug the mains plug of the plant light into an easily
accessible mains socket. Only operate the plant light at the
voltage indicated on the rating plate! No action is required by
the user to set the product to 50 or 60 Hz. The product
automatically adjusts to 50 and to 60 Hz.
• The plant light, the power cable (9) and the mains plug must
not be immersed in water or other liquids.
• Never touch the power cable (9) or the plant light with wet
hands.
• The plant light must not be operated in the immediate vicinity
of a basin, a bathtub, a shower or a swimming pool.If the plant
light falls into water, unplug the mains plug immediately and
only then remove the plant light from the water.
• To disconnect properly from the mains, the mains plug must be
pulled out of the socket. Never pull on the power cable (9) to
remove the mains plug from the mains socket. Always pull on
the mains plug itself.
24 - English