Bosch GPB Professional 18V-5 C Originalbetriebsanleitung Seite 19

Note: When operating the radio in the direct vicinity of ra-
dio-communication equipment or radio transceivers, or
other electronic equipment, the radio reception can be sub-
ject to interference.
Connecting External Audio Sources via AUX
Disengage the locking lever (8) and open the cover (7) of
the media compartment. Insert the 3.5‑mm connector for
the AUX cable (9) into the AUX IN socket (10). Connect the
AUX cable to a suitable audio source.
To play back the AUX audio source, press the source
button (18) until AUX appears on the audio source
indicator (h).
After removing the AUX cable connector, close the cover (7)
of the media compartment again and lock it to protect
against dirt.
If it fits, you can also place an audio source connected via
AUX in the storage compartment (6).
If one of the preset buttons (17) is pressed during AUX oper-
ation, the radio will switch to the station that was saved in
the last used radio operating mode.
Playing Back/Controlling External Audio Sources via
Bluetooth®
To play back an audio source (e.g. smartphone) via
Bluetooth®, either press the source button (18) until the
Bluetooth® indicator (g) appears in the display, or briefly
press the Bluetooth® button (21) regardless of the current
audio source.
If the radio has already been connected to an external audio
source via Bluetooth® and if this audio source is available, a
connection to this audio source will automatically be estab-
lished. As soon as the connection is established, the
Bluetooth® indicator (g) will light up continuously.
GPB 18V‑5 SC: The name of the device connected via
Bluetooth® is displayed on the top line of the multi-function
indicator (k). The text from the connected device appears
on the bottom line.
If a connection cannot be established within two minutes,
the connection set-up will be cancelled and the Bluetooth®
indicator (g) will flash continuously.
GPB 18V‑5 SC: <Not connected> will appear on the multi-
function indicator (k).
The radio will shut off automatically after another
17 minutes without a connection being established.
Establishing a new Bluetooth® connection:
– To establish a connection to a new external audio source,
press the Bluetooth® (21) button for longer than
0.5 seconds. This is also possible during a search pro-
cess, if there is an existing connection or when operating
with another audio source.
– The radio will start the search process. During the search
process, the Bluetooth® indicator (g) will flash.
– Activate the connection via the external audio source. For
smartphones, that is generally possible via the settings in
the Bluetooth® menu. The radio will appear as an avail-
able source under the name GPB 18V-5 C xxxx or
Bosch Power Tools
GPB 18V-5 SC xxxx. Please observe the operating in-
structions for your audio source/smartphone.
– As soon as a connection is established via Bluetooth®, the
Bluetooth® indicator (g) will light up continuously.
The audio source connected via Bluetooth® can also be con-
trolled via the radio:
– To select a track and to start playback, briefly press the
seek button (scan up) (19) or the seek button (scan
down) (13) until the required track has been reached.
Playback of the selected track is started automatically.
– To interrupt playback, press the mute button (12). The
mute indicator (f) appears in the display.
– To continue playback, press the mute button (12) again,
change the volume or press the seek button (scan
up) (19) or the seek button (scan down) (13).
– To fast-forward or rewind within a track, press and
hold the seek (scan up) button (19) or the seek (scan
down) button (13) until the required place in the track
has been reached.
If one of the preset buttons (17) is pressed during operation
via Bluetooth®, the radio will switch to the station that was
saved in the last used radio operating mode.
Setting the Time Indication (GPB 18V‑5 C)
To access the time indication menu, briefly press the clock
button (14).
You can choose between 12-hour <12H> and 24-
hour <24H> time formats; you can also set the hours and
minutes.
Navigating in the menu:
– Change menu settings: Turn the clock button (14).
– Save menu settings: Press the clock button.
– After saving the minutes setting or 10 seconds after last
using the clock button, the radio will return to audio oper-
ation.
Change the back-up batteries when the radio no longer
saves the time.
Reset Function (GPB 18V‑5 C)
To return all settings on the radio to factory settings (reset),
press the clock button (14) for longer than 0.5 seconds.
<RS> appears in the display.
Turn the clock button (14) to select between resetting
<YES> and returning to the current settings <NO>. Confirm
your selection by pressing the clock button.
Changing Menu Settings (GPB 18V‑5 SC)
To access the menu function, press the menu button (22).
Navigating in the menu:
– To scroll through a menu: Turn the menu button (22).
– To select and save a menu setting: Press the menu
button (22).
– To switch to a submenu: Press the menu button (22).
– To switch from a submenu back to a higher menu: Press
the seek button (scan down) (13). If the highest menu
level has been reached, the radio will return to audio op-
eration.
English | 19
1 609 92A 5RG | (30.09.2020)