Transport And Storage - Bosch Rexroth EC302 Montageanleitung

EC30X | 3 609 929 728/2014-01
5

Transport and storage

For storing and transporting the product, al-
ways observe the ambient conditions speci-
fied in the technical data of this product. In-
formation on the technical data is contained
in the corresponding section of these inst-
ructions.
Notes for transportation and shipping
CAUTION
Not secured Rexroth tightening
spindle during transport!
Risk of injury due to unsecured Rexroth
tightening spindles falling down!

Secure Rexroth tightening spindles
during transport.
Rexroth-tightening spindles are intended for
shipment by road, rail, plane or ship.
Rexroth-tightening spindles may be ship-
ped in individual packages or in multipacks.
Storage notes
NOTE
Damages!
Damages of the Rexroth tightening
spindle due to rust formation after unpa-
cking!

Make sure that Rexroth tightening
spindles are packed in corrosion-pro-
tected packages. Rexroth tightening
spindles are protected against corro-
sion if packed in their original pa-
cking.
Bosch Rexroth AG
Unpacking notes
After unpacking, Rexroth tightening spind-
les are ready to be installed in partly com-
pleted machinery or in a machine or system.
If Rexroth-tightening spindles are not instal-
led in partly completed machinery or in a
machine or system:

Note "Storage notes" on page 51.
How to handle packing material
The original packing of Rexroth tightening
spindles consists of recyclable material and
can be recycled.
51/72