Symbols - Bosch Rexroth EC302 Montageanleitung

EC30X | 3 609 929 728/2014-01
Safety instructions are set out as follows:
SIGNAL WORD
Type of risk
What occurs when the safety instruc-
tions are not complied with

Hazard avoidance
• Safety sign: draws attention to the risk
Tab. 2: Types of risk according to ANSI Z535.6-2006
Safety sign, signal word
DANGER
WARNING
CAUTION
NOTE

1.3.2 Symbols

The following symbols mark notes that are
not safety-relevant but increase the under-
standing of the documentation.
Tab. 3: Meaning of the symbols
Symbol Meaning
If this information is disregarded,
the product cannot be used and/
or operated to the optimum ex-
tent.

single, independent step
Bosch Rexroth AG
• Signal word:
zard, see tab. 2 on page 41
• Type of risk:
source of the hazard
• Consequences:
when the safety instructions are not com-
plied with
• Precautions:
be avoided
Meaning
identifies a dangerous situation that will result in de-
ath or serious injuries if it is not avoided.
identifies a dangerous situation that may result in de-
ath or serious injuries if it is not avoided.
identifies a dangerous situation that may result in
minor to moderate injuries if it is not avoided.
Damage to property: The product or the environment
may be damaged.
Tab. 3: Meaning of the symbols
Symbol Meaning
1.
numbered step:
2.
The numbers specify that the
3.
steps are completed one after the
other.
Note This information refers to possible
limitations with regard to the pro-
duct.
Menus Entry in the graphical interface of
the software
41/72
identifies the degree of ha-
identifies the type or
describes what occurs
states how the hazard can