R911172834 / 02
|
PRC7000
2
Safety instructions
2.1
On this section
2.2
Intended use
2.3
Inappropriate use
This section includes important information on the safe handling of the
described product.
The described product has been developed, manufactured, tested and
documented in compliance with the EU standards.
Nevertheless there is a danger of personal injuries and damage to
property if you fail to observe this section and the safety instructions in
this documentation.
"
Therefore read this documentation carefully and fully before you
work with the product.
"
Keep the documentation so that all users have access to it any time.
"
Always provide the product to third parties together with the product
documentation.
• The product serves in connection with an integrated power unit and
appropriate welding transformer for resistance welding of metals.
• The product is only intended for professional/industrial operation
and not for private use.
• The product is intended for operation in industrial environments
(emission class A, group 2) and complies with the following direc
tives and standards:
Directives
• Low-voltage directive 2006/95/EC
• EMC directive 2004/108/EC
Standards
• EN 50178
• EN 60204-1
• EN 62135‐1
• EN 62135-2
Intended use also means that you have read and understood the
product documentation.
This Class A equipment is not intended for use in residential loca
tions where the electrical power is provided by the public low-
voltage supply system.
Bosch Rexroth AG
Safety instructions
WARNING
177 / 334