Mains Connection - Conrad M.A.R.L.I.S. MkIII Bedienungsanleitung

10. Mains Connection

• Connect the mains cable low-voltage plug to the mains connection (8).
• Plug the mains plug into a wall socket.
• The POWER switch (7) is used to switch the PA system on and off.
Position "O": The device is off.
Position "I": Device on.
The POWER (4) display lights up when the device is switched on.
32
Downloaded from www.Manualslib.com
The mains socket to which the PA system is connected must be easily accessible so that the
system can be quickly separated from the mains voltage in case of an error.
The PA system and all connected devices must be turned off when connecting the voltage
supply.
Make sure that all electrical connections and connection cables between the different devices
and any extension cables comply with the regulations and the operating instructions.
manuals search engine