Mains Connection - Conrad MPA Livelike Bedienungsanleitung

10. Mains Connection

Before plugging in the mains plug, ensure that the device voltage indicated at the subwoofer
corresponds to the available mains voltage. Do not connect the device if the indication does not
correspond to the available mains voltage. Wrong supply voltage will cause serious damage.
Be careful when handling mains cables and mains connections. Mains voltage may cause potentially
fatal electric shock.
The mains socket to which the PA system is connected must be easily accessible so that it can be
quickly separated from the mains voltage in case of an error.
The PA system and all connected devices must be turned off when connecting the voltage sup-
ply.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the different devices and
any extension cables comply with the regulations and the operating instructions. If an extension
line is used, ensure that it is designed for the respective load.
• Connect the mains cable to the mains connection (14).
• Plug the mains plug into a wall socket.
• The POWER switch (13) is used to switch the PA system on and off.
Position „O": The device is off.
Position „I": Device on.
The ON (3) display lights up when the device is switched on.
32