Function And Feature Description - Conrad M.A.R.L.I.S. MkIII Bedienungsanleitung

5. Function and Feature Description

The MPA - M.A.R.L.I.S. MkIII PA set is a PA system with one or two subwoofers.
You may retrofit the MPA - M.A.R.L.I.S. 2.0 MkIII set with the individual available active subwoofer for the
MPA - M.A.R.L.I.S. 2.2 MkIII PA set at any time.
The input signal is separated in bass and midrange tone shares in the subwoofer by an active frequency switch. The
bass shares are amplified by the bass end stage and converted into low-frequency sound waves via the subwoofer/
s. The midrange tone shares are also amplified by a subwoofer end stage and converted into sound waves via
satellite speakers.
The 38cm-(15") subwoofer is installed in a bass reflex casing that also contains the entire amplifier electronics. The
satellite speakers are built in 2-path technology, with a 200mm-(8") low midrange driver.
The subwoofer casing is equipped with rollers to permit easy transport. All casings are protected well from mechanic
strain with carpet application.
The satellite speakers can be set up with speaker stands that can also be connected to the subwoofer speaker flange.
Features:
• Vibration-free metal grids (at satellites and subwoofers)
• Air-tight grips
• Stable and robust subwoofer steering rollers (2 can be arrested)
• Aluminium speaker flanges
• Resilient carpet surface
• Performance-capable dynamic 25mm (1") high sound driver in the satellites
• Speaker connection terminals
• Symmetrical XLR input sockets and asymmetric cinch inputs
• Main level controller
• Sub level controller
• Phase inverter switch
• Filterless cooling
• Fully symmetrical end stage setup
• Perfectly short-circuit proof
• Limiter for subwoofer and satellite end stages
• 3 channel end stage RMS/MAX 400/800 W
Downloaded from www.Manualslib.com manuals search engine
25