Additional Functions - AEG KDK911423 Bedienungsanleitung

6.5 Additional functions

"External vacuum"
It is to be used to eliminate the air inside
special air-tight containers (not supplied
with this appliance).
• For the external vacuum, tighten the
• Connect the container pipe to the
• Set the maximum vacuum level
• With the appliance cover open press
• The button stops flashing at the end of
Downloaded from www.Manualslib.com
9
fitting provided, inside the tank.
9
fitting .
disable the sealing .
the button to start the packaging
cycle. This button will start to flash.
this cycle.
manuals search engine
"Reconditioning cycle"
This function is used in the following
situations:
• Before using the appliance for the first
time.
• After extensive downtime.
• After having sealed products with high
humidity content (e.g. soups).
• When you notice a decrease in
appliance performance (e.g. more time
to vacuum or it does not vacuum at
all).
This program lasts about 15 minutes and
guarantees the complete cleaning of the
pump, removing any liquid emulsion that
might be found in the oil.
Do not seal any product while this
9
program is running.
Proceed as follows:
• Hold down the
buttons flash.
• Close the cover with light pressure.
• Press the
buttons flash while the program runs.
• At the end of the cycle (15 minutes)
the
appliance will be ready for use.
and
ENGLISH
button until all the
button. The and
button will stop flashing and the
11