Before Starting The Equipment - EINHELL BT-KF 150 Originalbetriebsanleitung

Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in accordance with a standardized
testing method. It may change according to how the electric equipment is used and
may exceed the specifi ed value in exceptional circumstances.
The specifi ed vibration value can be used to compare the equipment with other
electric power tools.
The specifi ed vibration value can be used for initial assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in accordance with instructions, cer-
tain residual risks cannot be rules out. The following hazards may arise in
connection with the equipment's construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a
prolonged period or is not properly guided and maintained.

5. Before starting the equipment

Never use the equipment for purposes other than that for which it is designed and
only use it with original parts/accessories. The use of parts or accessories other
than those recommended in the operating instructions may place your safety at
risk. Only use an extension cable which is fully unwound and undamaged and
which has a capacity of at least 5A.
Danger! Do not use this tool for making cutouts in the area of installations or ope-
nings with current-conducting electric cables or in walls behind which current-con-
ducting electric cables may have been installed. The bit could conduct electricity
Anl_BT_KF_150_SPK7.indb 30 Anl_BT_KF_150_SPK7.indb 30
GB
= 6.6 m/s
2
h
2
- 30 -
23.06.2016 09:28:59 23.06.2016 09:28:59