Time Code Menu - Panasonic AG-DV2500E Bedienungsanleitung

MENU SCREEN

TIME CODE menu

Items
TC
CLEAR
NDF/DF
(NTSC)
DV TC DUP.
TC OUT
OFFSET
PAGE BACK
E-58
– Contents of the menus –
Setting
Presets the time code:
For details, please refer to Page 35 "Setting Time Codes".
CANCEL Use this menu item to choose whether to clear the time code values:
EXECUTE CANCEL
EXECUTE
NON DROP Select the framing mode for the time code generator:
DROP NON DROP
DROP
OFF Use this menu item to select the type of time code to be recorded
ON for DV signal input:
OFF
ON
OFF Use this menu item to set the timing to output time codes from the
+1F 9PIN remote terminal of the main unit to the editing remote con-
+2F troller:
–2F OFF : Usually, this is selected.
–1F +1F : Sets the timing to 1 frame faster.
+2F : Sets the timing to 2 frames faster.
–2F : Sets the timing to 2 frames slower.
–1F : Sets the timing to 1 frame slower.
Return to the top MENU.
Contents
: Do not clear.
: clear.
: Sets the unit to the non-drop mode. Use this set
ting when the number of frames of the time code
is important.
: Sets the unit to the drop-frame mode. Use this set
ting for real-time based time codes.
: Records the time codes of the built-in time code
generator of the main unit.
: Records the time codes and user-bits input to the
DV IN terminal.
The time code framing mode automatically takes
on that of the input time code.
(continued)