Inhaltsverzeichnis
Werbung
Operation
1. Place the angle laser flat on the
floor respectively on the surface
to be processed.
2. Press the on/off switch (2) to
switch on the two laser beams
simultaneously.
3. Press the buttons (3) to fix the
angle laser unit on smooth sur-
faces using the suction cups at
the rear side of the unit.
4. Always adhere to the safety
instructions.
5. After use, press the on/off switch again to switch off the lasers.
The unit does not power off automatically.
Note: Check the position of the tool during use, it is not self-
levelling.
Technical Data
Laser Output Rating:
Laser Wavelength:
Operating Temperature:
Power Supply:
Length of Laser Line:
Accuracy:
Dimensions:
Using
< 1 W
630 – 650 nm
0 – 40 °C
4.5 V
/ 3x LR6 (AA)
max. 8 m (depending on lighting
conditions)
± 1°
150 x 150 x 51 mm
16
Werbung
Inhaltsverzeichnis
