en
88 | HTD 6xx / HTD 8xx | Component replacement
3. Remove the four nuts from the display board.
4. Insert new display board and secure with the four
nuts.
5. Reattach all connectors to the display board.
6. Fasten the display housing to the light box.
|
1 692 106 011
2019-03-26
9.6
Replacing the display unit – HTD 8xx
1. Loosen the socket head screw in the display housing
until the display housing can be lifted out.
Fig. 29:
Light box
1 Display housing screw
2. Unplug connectors from the display unit.
3. Reattach connectors to new display unit and insert
new display unit.
4. Fasten the display housing.
Robert Bosch GmbH