Bosch HTD 6 serie Serviceanleitung Seite 72

en 72 | HTD 6xx / HTD 8xx | Service setting – HTD 8xx
Measuring instrument (height sensor)
i
The height sensor is switched on and off, and the
calibration of the height sensor is performed here:
1. Select "MEASURING INSTRUMENT" in the "SERVICE"
screen.
2. Select as follows to switch on or off:
$
Manual - to switch off manually (without height
sensor)
$
Sensor - To switch height sensor on
3. The
key resets the settings.
4. The
key calibrates the sensor. Follow the inst-
ructions on the screen for the calibration.
5. Press the
key to access the "SERVICE" screen.
|
1 692 106 011 2019-03-26 Robert Bosch GmbH