Siemens SITRANS LR200 Kurzanleitung Seite 15

Handheld Programmer (Part No. 7ML1930-1BK)
1)2) 3)
Ordered separately.
C
Programming via the handheld programmer
:
Notes
• While the device is in PROGRAM mode the output remains active and continues to
respond to changes in the device.
• Press Mode
• SITRANS LR200 automatically returns to Measurement mode after a period of inactivity
in PROGRAM mode (between 15 seconds and 10 minutes, depending on the menu
level).
Parameter menus
Parameters are arranged in a 5-level menu structure.
For the complete list of parameters with instructions, see
the full manual.
1. Enter PROGRAM mode
• Point the programmer at the display from a maximum
distance of 300 mm (1 ft).
• RIGHT arrow
opens menu level 1.
• Mode opens the menu level last displayed in
PROGRAM mode within the last 10 minutes, or menu
level 1 if power has been cycled since then.
1)
New value is displayed in LCD secondary region.
2)
Opens the menu level last displayed in this power cycle, unless power has been cycled since exiting
PROGRAM mode or more than 10 minutes have elapsed since PROGRAM mode was used. Then top
level menu will be displayed.
3)
Opens the top level menu.
A5E32153438 SITRANS LR200 (PROFIBUS PA) – QUICK START MANUAL
Key Function in Measurement Mode
Updates internal enclosure temperature reading
Updates echo confidence value
Updates distance measurement
Mode opens PROGRAM mode
RIGHT arrow opens PROGRAM mode
UP or DOWN arrow toggles between AIFB1 and AIFB2.
to toggle between Measurement and Program Mode.
activates PROGRAM mode and
1)
.
1)
.
2)
.
3)
.
1. QUICK START
2. SETUP
2.1. IDENTIFICATION
......................
2.6. LINEARIZATION
2.6.1. VOLUME
2.6.1.1.VESSEL SHAPE
handheld programmer
Max. 300 mm
(1 ft)
1)
.
display
Page EN-13