Searching For The Time And Date - Time/Date Search; Selecting The Searching Interval; Searching For The Time And Date - Sony SVT-72P Bedienungsanleitung

Searching for the Time and Date — Time/Date
Search

Selecting the Searching Interval

1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The GENERAL SET menu appears.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH CONVENTION
BAUD RATE 1 9 2 0 0
< >
NEXT PUSH
+ –
SELECT : DATA SET : / RETURN : MENU
4
Press MENU V to move the flashing to the setting
of T/D SEARCH and set to CONVENTION or
NEW by pressing MENU + or –.
GENERAL SET
TAPE IN MODE STOP
TAPE END MODE REW
TAPE USED COUNT OFF
CLOCK ADJUST 0 1 : 0 0
APC ON
THREAD CHECK OFF
T/D SEARCH NEW
BAUD RATE 1 9 2 0 0
< >
NEXT PUSH
+ –
SELECT : DATA SET : / RETURN : MENU
CONVENTION: to search every an hour
NEW: to search every 10 minutes
5
Press SEARCH to return to the normal display.
40
2-4 5
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until "NEXT PUSH B" flashes and
press MENU B.

Searching for the Time and Date

1
1
Turn on the power of the equipment to be used.
2
Press SEARCH in stop mode until the time/date
search indicator flashes in the display window and
on the monitor screen.
When CONVENTION is selected for T/D
SEARCH on the GENERAL SET menu:
In the display window
When NEW is selected for T/D SEARCH on the
GENERAL SET menu:
In the display window
3 2 4
1 H 1 2 M 0 6 S
T / D S E A R C H
0 1 1 2
Hour
Date
On the monitor
1 H 1 2 M 0 6 S
T / D S E A R C H
0 1 1 2 2 0
Minute
Hour
Date
On the monitor