Specifications - Makita 4324 Bedienungsanleitung

ENGLISH
1-1. Cutting action changing lever
2-1. Lock button
2-2. Switch trigger
3-1. Speed adjusting dial
4-1. Blade holder
4-2. Hex wrench
4-3. Bolt
5-1. Bolt
5-2. Roller
5-3. Blade
6-1. Hook

SPECIFICATIONS

Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Explanation of general view
6-2. Hex wrench
7-1. Dust cover
8-1. Cutting line
8-2. Base
10-1. Hex wrench
10-2. Bolt
10-3. Base
11-1. Graduation
11-2. Edge
12-1. Base
12-2. Hex wrench
Model
Wood
Mild steel
-1
)
Overall length
Net weight
Safety class
equipment and
environmentally compatible
END201-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 82 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
its
The typical weighted root mean square acceleration
value is 9 m/s
These values have been obtained according to
EN60745.
Model; 4324
ENE019-1
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37/EC.
4
12-3. Bolt
13-1. Starting hole
16-1. Dust cover
16-2. Hose
17-1. Anti-splintering device
17-2. Protrusions
18-1. Aluminum base
18-2. Anti-splintering device
19-1. Cover plate
19-2. Aluminum base
4324
18 mm
65 mm
6 mm
500 - 3,100
207 mm (Steel base type)
214 mm (Aluminum base type)
1.9 kg (Steel base type)
2.0 kg (Aluminum base type)
/II
Wear ear protection.
2
.
Yasuhiko Kanzaki CE2005
ENF002-1
ENG004-2
ENH101-5