Inhaltsverzeichnis
Werbung
en
Switching on the
appliance
S
Insert the enclosed battery into the battery
compartment 6 (Fig. 2).
S
Place the scales on a level, hard and dry
surface.
S
Initialise the scales by briefly pressing the
middle of the weighing platform.
oooo is indicated on display. Then scales
automatically switch off. The scales is ready
to use.
Two functions can be selected with these
scales:
- Weighing function only or
- Measurement of weight, body fat and water
content (input personal date).
Weighing function
Fig. 3
S
Step onto the scales and stand still until the
bar graph on the display 1 stops moving.
Distribute your weight evenly on both legs.
The measurement can now be read off in kg/g.
The scales automatically switch off for a couple
of seconds after the measuring process.
Before the scales switch off, the bar graph is
displayed briefly.
Inputting personal data
To measure the body fat and water
percentage, you must first input your personal
details.
The scales feature 10 memory locations into
which personal data such as size, age and sex
are input.
Note: If no button is pressed within 15 sec.
during programming, the scales automatically
switch off. If the +/- button
the numerical sequence is accelerated.
8
is held down,
2
Fig. 4
S
To program the scales, place them on
a level surface.
S
Press MODE button 4. The setting for
height input flashes.
S
Input height with + - buttons 2.
S
Confirm by pressing SET button 5.
The setting for age input flashes.
S
Input age with + - buttons 2.
S
Confirm by pressing SET button 5.
The symbol for
now flashes.
S
Select the appropriate sex with + -
buttons 2.
S
Confirm by pressing SET button 5. The
symbol for Normal or Athlete mode flashes.
S
Select the mode for normal (N) or
sportsperson/athlete (A) with + - buttons 2.
Note: This input is displayed for persons of age
18 and above only. For persons under the age
of 18 this input option is skipped.
S
Confirm by pressing SET button 5.
An acoustic signal sounds. The symbol R
(memory location) is now displayed.
S
Select a memory location between 1 and
10 with the + - buttons 2. Memory locations
already in use are identified with the
symbol H.
S
Confirm by pressing SET button 5.
An acoustic signal sounds. The input is
saved.
The scales automatically switch off after
a couple of seconds. To assign other memory
locations, repeat the Inputting personal data
process.
Note: Select a memory location which is
to be deleted. Then simultaneously press
+ - buttons 2. The input in this memory/
location is deleted.
(female) or
(male)
Werbung
Inhaltsverzeichnis
