Sucking Liquids; Using The Blow Function; Accessory - Westfalia NTS 15 Originalanleitung

4. Empty the dust bag over a bin or a similar container outdoors. Attach a new
the dust bag and lock the motor unit with the locking clips. Re-attach the
suction hose onto the unit.

Sucking Liquids

Before sucking liquids, remove the dust bag from the container.
1. Place the foam filter (10) on the motor unit, as
shown in the picture on the right. Never use
the vacuum cleaner without the foam filter
when sucking liquids!
2. Place the motor unit on the container and
close it with the locking clips.
3. For sucking liquids it is sufficient to attach the
suction hose only.
4. Insert the power plug into the wall socket and
switch the unit on by pressing the ON/OFF
switch.
Hints:
In the motor grille you will find the safety floater (13). As soon as the container
is filled with water, the floater will rise upwards. Please note when sucking
liquids and the water level can be too high, the motor will still run but the
vacuum cleaner will not suck the liquid furthermore. Therefore please pour
out the liquid in due time.
If you intend to suck with the dust bag again after having sucked liquids, wipe
the dust container dry with a cloth or paper towel. By doing so, dust and hair
cannot stick on the dust container wall. If possible dry the suction hose, too.
Re-insert the dust bag for sucking dry dust and dirt.

Using the Blow Function

1. Pull the suction hose from the suction opening (4) and insert the hose into the
blow flange (8) on the motor unit.
2. Switch on the vacuum cleaner to blow away light dust, dirt, etc.

Accessory

According to application, either attach the floor brush (9) or the crevice tool (12)
on the suction tubes (6) or directly on the suction hose (7).
Operation
17