Herunterladen Inhalt Inhalt Diese Seite drucken

Velleman CAMCOLVC6 Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für CAMCOLVC6:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Push the crown [B] back towards the housing to avoid accidental
adjustments.
Using the camera
The camera lens is hidden inside the number 2 [A].
Switch the camera on by pressing the camera on pusher [D] for
±3s. The status LED [C] will light up green, red and green again.
Note: The camera will automatically switch off after being inactive for
30 seconds. The status LED [C] will also switch off.
After the red flash, hold the camera on pusher [D] pressed for
± 3s to start recording. The status LED [C] will flash shortly
twice and switch off.
Press and hold the camera on pusher [D] for ±3s to stop
recording and deactivate the camera. The status LED [C] flashes
red and than switches off.
To take a snap shot, activate the camera by pressing the camera
on pusher [D] for ±3s. After the red flash of the status LED [C],
press the camera on pusher [D] again. The status LED [C] will
burn red and then green again. Hereafter, press the camera on
pusher again [D] to take the next snapshot. Hold the camera on
pusher [D] pressed to start recording.
Shortly press the camera off pusher [F] to stop recording or to
switch off the camera. The status LED [C] will switch off.
Connecting to USB port
Remove the cover of the USB port [E] and plug the jack of the
included USB cable into the port of the watch. Plug the other end
into a suitable powered USB port. The status LED [C] turns green.
Note: Never connect the watch to the PC in reverse order! If you do, it
may seriously damage the watch and the PC. To disconnect the
watch from the PC, first click onto the icon (
hardware) at the bottom of your screen and select Eject USB-
disk. Disconnect the watch from the PC only after the message
You can now safely remove hardware has appeared to
prevent damage to the watch and the PC.
The PC will automatically find the new hardware and install the
driver. After the driver has been installed correctly, the watch is
ready for use. Contact your dealer if the driver does not install
correctly.
The watch now acts as a removable storage medium. Open the
desired folder Image (folder containing JPEG picture files) of Video
CAMCOLVC6
6
Rev. 01
Safely remove
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis