WARNING DEVICE NVD-111
Installation
3.2
EN
18 - EN
Mounting of the Warning Device
Note!
If the device is installed in a housing or switch cabinet, note the mounting
instructions of the housing or switch cabinet manufacturer.
Caution!
Overheating
If the external temperature exceeds a maximum of 60 °C, the device may be
damaged.
Ensure sufficient ventilation at the installation location.
■
Maintain a minimum distance of 5 mm between the devices on the
■
DIN mounting rail.
Mount the warning device on the DIN mounting rail
Clip the device on the rail as follows:
Figure 3.6
Click!