Safety Information - HP Cricut Imagine Benutzerhandbuch

sAFety InForMAtIon

Disconnect electrical power before servicing or cleaning.
Do not place your fingers or other objects in the Cricut Imagine while it is
™
connected to electrical power, powered on, or during cutting operations. Rapid
movements of the cutting carriage during operation may cause bodily injury and/
or damage to the Cricut Imagine .
™
Always follow basic safety precautions when using this product to reduce risk of
injury from fire or electric shock. Read and understand all instructions in the docu-
mentation that comes with the Cricut Imagine .
™
Use only a grounded electrical outlet when connecting this product to a power
source. If you do not know whether the outlet is grounded, check with a
qualified electrician.
observe all warnings and instructions marked on the product.
Do not install or use this product near water, or when you are wet.
Install the product securely on a stable surface.
Install the product in a protected location where no one can step on or trip over
the power cord and the power cord cannot be damaged.
If the product does not operate normally, see Troubleshooting.
There are no user-serviceable parts inside. Refer servicing to qualified
service personnel.
The power cord cannot be repaired. If it is defective, it should be discarded or
returned to the supplier.
ozone-depleting chemicals, such as chlorofluorocarbons (CFCs), have been elimi-
nated from the Provo Craft manufacturing processes.
This product contains lead in the solder that might require special handling at
end-of-life.
SAFETY InFoRMATIon 5