Safety Information - HP Cricut Expression 2 Benutzerhandbuch

SAfETy InfOrMATIOn

Disconnect electrical power before servicing or cleaning.
WArnInG! Do not place your fingers or other objects in the Cricut Expression 2 machine
while it is connected to electrical power, powered on, or during cutting operations. Rapid
movements of the cutting carriage during operation may cause bodily injury and/or
damage to the Cricut Expression 2 machine.
Always follow basic safety precautions when using this product to reduce risk of injury
from fire or electric shock. Read and understand all instructions in the documentation
that comes with the Cricut Expression 2 machine.
observe all warnings and instructions marked on the product.
Do not install or use this product near water or when you are wet.
Install the product securely on a stable surface.
Install the product in a protected location where no one can step on or trip over the
power cord and the power cord cannot be damaged.
If the product does not operate normally, see troubleshooting.
there are no user-serviceable parts inside. Refer servicing to qualified service personnel.
the power cord cannot be repaired. If it is defective, it should be discarded or returned
to the supplier.
ozone-depleting chemicals, such as chlorofluorocarbons (CFCs), have been eliminated
from the Provo Craft manufacturing processes.
this product contains lead in the solder that might require special handling at
end-of-life.
4
SAFEtY INFoRMAtIoN